Berbel Headroom Hood Glassline 2
HEADROOM HOOD GLASSLINE 2
HEADROOM HOOD GLASSLINE 2
Joyful Kitchen Party
The curved glass screen is a distinctive feature of the Glassline 2 headroom hood. The built-in, indirect rear lighting of the berbel extractor hood creates the right mood for any kitchen party.
To ensure top vapour capture efficiency and condensate-free decorative glass surfaces, the Glassline headroom hood is fitted with BackFlow technology (patent pending). At 46 dB(A), the new EC fan motor is particularly quiet.
INFORMATION
AVAILABLE WIDTHS
90 | 110 cm
COLORS
- White Glass Decoration
- Black Glass Decoration
VERSIONS
- Black glass body, with rear effect lighting
- White glass body, with rear effect lighting
HEADROOM AT ITS BEST
The berbel Glassline headroom hood impresses users with its sophistication, power, and economy. The distinctive and elegant optics make this berbel headroom hood into a real eye-turner in your kitchen. The elegant control panel only becomes visible when you touch it. A delightful design. So that you can keep your head clear to create passionate culinary treats.
FEATURES
POWERFUL VAPOUR EXTRACTION
High-quality stainless steel and shatterproof glass combined with the latest technology make the Glassline headroom hood into a whisper-quiet, efficient extractor hood that meets all of your requirements. The full range of features, including BackFlow technology (patent pending) and the latest generation of our Capillar Trap, ensure top efficiency when it comes to eliminating fats and kitchen odours.
SPECIAL EQUIPMENT
- EcoSwitch Control: Easy change between Recirculation and exhaust air
- Intelligent solutions with the berbel wall box and/or a window contact switch
STANDARD FEATURES
- Efficient and consistently high rate of fat separation with the powerful berbel principle combined with the latest generation of our now even better Capillar Trap
- Removable stainless steel collection tray, stainless steel anti-impact edge, and perfectly finished interior for fast and easy cleaning
- BackFlow technology for top vapour capture efficiency
- Energy-saving and quiet thanks to a modern EC fan motor
- Controlled opening mechanism with gently gliding hinges
- Elegant capacitive control panel - hidden behind the glass - that even responds if your fingers are wet
- EcoSwitch preparation
- Energy saving function. The maximum power stage (P) automatically switches back to energy-saving stage 3 after a defined runtime.
MODES
RECIRCULATION
Recirculation mode is the most energy-saving operating mode. The air is cleaned by an odour filter and directed back into the room. The room temperature is not altered. It is also simple to implement, because wall penetrations and exhaust channels are not required. Due to their large volume, are especially efficient at odour-binding and absorb up to 97% of bad smells. A further advantage of the berbel recirculation filter: only the proactive carbon needs to be changed – not the entire filter – and it only needs to be replaced every two to three years depending on how hard the filter has to work. The berbel refill pack is available for a cost-effective and environmentally friendly replacement.
EXHAUST AIR
Exhaust air directed outside the building is particularly effective when it comes to the removal of odours, fumes and the moisture that results from cooking. It is advisable to use ato minimise heat loss. This seals and insulates the pipe outlet on the fade when the extractor hood is switched off. The planning of the exhaust air flow path should be optimised, since this positively influences the efficiency and smooth running of the hood. The appropriate duct material for this can be found in the
HYBRID
Combine the benefits of both exhaust air mode and recirculation mode. With the berbel EcoSwitch you can respond flexibly to your needs depending on cooking and weather conditions by using the EcoSwitch button on your berbel extractor hood to switch between energy-saving recirculation mode in winter and particularly effective exhaust air mode whenever you need: for instance during fast browning or throughout the summer months.
In addition to the berbel extractor hood with EcoSwitch you need the following system components for this:
- Berbel wall box
- Optimised flow for extraction ducts
- Berbel hybrid filter
TECHNICAL DATA
ENERGY EFFICIENCY CLASS
Extractor hoods are classified into energy efficiency classes. These classes range from A++ (low consumption of energy) to E (high consumption of energy).
FAT SEPARATION CLASS
From A (best) to G (worst). Assesses the percentage of fat separated from the air sucked into an extractor hood. The fat separation level is one of several factors that influence the best possible air quality.
ANNUAL CONSUMPTION IN KWH
Daily one-hour operation of the extractor hood (and two hours of lighting) is used as the calculation basis. The actual energy consumption depends on the usage of the appliance in the home. Divided into classes from A (best) to G (worst). Assesses the airflow efficiency, so the electrical energy used to operate the fan in relation to the quantity of air captured, filtered, and passed through the extractor.
LIGHTING EFFICIENCY CLASS
From A (best) to G (worst). Assesses the efficiency of the lighting on the cooking surface, so the ratio between the average light intensity and the connected electrical load of the lighting system.
FLUID DYNAMIC EFFICIENCY CLASS
A | A
SOUND LEVEL STAGE 3 (DB(A) RE 1 PW)
46 | 49
ENERGY EFFICIENCY CLASS
A | B
ANNUAL CONSUMPTION IN KWH
37 | 39
LED, W
14.2 | 19.5
LIGHTING EFFICIENCY CLASS
A | A
FAT SEPARATION CLASS
B | B
LED HOB ILLUMINATION, LUX
520 | 711
ACOUSTIC PRESSURE STAGE 3 (DB(A) RE 20 ΜPA)
58 | 60
AFTERRUN FUNCTION FOR RECIRCULATION MODE
✓ automatic (configurable)
FREE-BLOWING FAN PERFORMANCE, M3/H
630 | 760
FAN POWER CONSUMPTION, W
170
NET WEIGHT
kg 35 | 41
PIPE CONNECTION
Ø in mm 150
RECIRCULATION FILTER SATURATION INDICATOR
✓
REC. DISTANCE FROM HOB
50 | > 65
PERFORMANCE STAGES
3 + power stage (P)https://electronics.jidipi.com/?p=6843&preview=true
PLANNING INFORMATION
- Max. niche back panel thickness of 21 mm for flush finish under hood
- Power supply of 230 V (power socket) must be planned behind chimney
- Space-saving hybrid filter available with outlet to rear or side
- Recommended worktop depth: max. 600 mm
- Optimal width of hood: hob width + 10 cm
- Not suitable for use with an external or intermediate fan (Backflow-Technology without function)
- Mount shaft for recirculating air with air outlet pointing upwards
- Note minimum height for EcoSwitch-System. Space-saving hybrid filters available with outlet to the side or rear, instead of a 90° bend
- With use of permalyt® filter plan at least 10 cm for installation
