Daveywater Spapower Classic Spa Heater
SPAPOWER CLASSIC SPA HEATER
SPAPOWER CLASSIC SPA HEATER
This classic heater is a reliable, easy to install, simple to operate, easy to maintain products - able to be installed in a vertical or horizontal configuration for complete flexibility. For use in above ground spas or small pools, it's a simple yet powerful spa heater, inclusive of thermostat control, 10amp CAT38 outlet and installation guide.
INFORMATION
INLET & OUTLET DIAMETER
40mm
HEATER PRESSURE, MAX. (HEAD OF WATER)
300 kPa (31mm)
PRESSURE SWITCH ON PRESSURE
5 psi (34 kPa)
PRESSURE SWITCH OFF PRESSURE
2 psi (13 kPa)
MAXIMUM CONTROLLED TEMPERATURE
45˚C*
THERMAL CUT-OUT TEMPERATURE
55˚C
MAXIMUM AMBIENT TEMPERATURE
50˚C
DOWNLOADS
Q54553P 2.3KW MODEL SUPPLY REQUIREMENTS
220–240V 50-60Hz, 19.5 Amps
Q54554P 4.5KW MODEL SUPPLY REQUIREMENTS
220–240V 50-60Hz, 28.8 Amps
Q54555P 6.0KW MODEL SUPPLY REQUIREMENTS
220–240V 50-60Hz, 32 Amps
Q54553P 2.3KW MODEL HEATER ELEMENT WATTAGES
9.5A @ 240V a.c
Q54554P 4.5KW MODEL HEATER ELEMENT WATTAGES
18.8A @ 240V a.c
Q54555P 6.0KW MODE HEATER ELEMENT WATTAGES
25A @ 240V a.c
FEATURES
• Simple to install and operate
• Temperature selection dial and mains output socket for powering an air switch control box
• Can be installed on the base supplied or horizontally
• It is supplied with 40mm barrel unions
• Electrical systems are prewired in the heater head ready for the supply connection
• Available in 2.3kW, 4.5kW and 6.0kW
DETAILS
• Had wired, mains power supply
• Includes thermostat control and 10amp outlet
• Fully approved for pool and spa use under AS3136 approval number SGS/11Ø545
DIMENSIONS
- Height : 293 mm, 526 mm
- Width : 200 mm, 210 mm, 45 mm, 170 mm, 125 mm
