Alpes Inox Flip-up Induction Hobs
FLIP-UP INDUCTION HOBS
FLIP-UP INDUCTION HOBS
Two hobs with two electric induction burners. The hobs can be flipped up for making use of the space underneath.
The flip-over hobs offer a number of advantages: an embedding recess is not required and the bottom can be utilised to accommodate the oven; when the range top is not needed for cooking it can be flipped over so that the working surface underneath can be utilized; the vertical positioning is secured by a check pin that snaps automatically.
INTRODUCTION
DIMENSIONS
- Depth 52 cm
- Width 30 cm
- Height 7 cm
MATERIALS AND CHARACTERISTICS
- The flip-up hobs are installed on the top and require only a small hole for the electricity-gas connection and fixing of the rear bracket/hinge
- When not in use, they can be flipped up to create a larger work space
INDUCTON AREA
- Ø 11/18 cm
- Ø 15/22 cm
VOLT
- 220
- 220
POWER WATT
- 1400 or 1850
- 2300
INSTALLATION
IMPORTANT DIRECTIONS
- When opening the package, check that the appliance is not damaged.
- Keep wrapping materials out of children’s reach.
- Installation and adjustments must be carried out by specialized personnel only.
- Do not alter any of the technical features.
- The appliance cannot be installed and used outdoors.
- This appliance, suitable for domestic applications, must be used for the sole purpose of cooking food, for which it has been designed and manufactured.
DETAILS
It is important that all the operations relative to the installation are performed by qualifi ed personnel. The kit includes screws, nuts and washers for securing the fastening bracket. Make sure to leave a minimum clearance of 6 cm from the rear wall and any side walls (also in the event of combinations with other appliances). The connection must be performed in compliance with national laws in force. Unpack the hob, removing all the wrapping and protecting material. Drill the relative holes in the working surface following the instructions in the diagrams on page 5 - 6.
Connect to mains by plugging the special power cord with diecast three-pole connector into the power outlet, accessible to the user after installation has been completed. The appliance must be earthed.All electrical parts are 230 V ~ - 50/60 Hz. We suggest that the hob should be placed underneath a suction hood or an exhaust/air cleaning system at a minimum distance of 60 cm and maximum 80 cm. The degree of protection against fire hazards of the appliance is of Y-type, therefore the latter can be drawn near to walls higher than the work top.
