Codelocks Cl4210 CL4210 Electronic Locks
CL4210 ELECTRONIC LOCKS
CODELOCKS CL4210 ELECTRONIC LOCKS
CL4210 Electronic Tubular Latchbolt
Fully programmable on the door via the keypad with a multiple range of functions.
The outside lever turns freely without operating the latchbolt. When a valid code is entered and the blue LED lights, the lever will retract the latchbolt. When the door closes the spring latch will automatically lock the door.
The key will open the door for management functions. The key may be used to set the lock into Code Free mode so that anyone can open the door without using a code. Code Free Mode can also be programmed at the keypad using the Master Code.
INFORMATION
CODES
User Codes 4, 5 or 6 Digits Long
BRAND
Codelocks
BUTTONS
2 x 5 + Programming
DOOR THICKNESS
1 3⁄8" - 2 3⁄8" (35mm - 60mm)
CODE CHANGE
Keypad (On Door)
KEYPAD
Individual stainless steel buttons
LATCH TYPE
2 3⁄8" Mortise Latch, 2 3⁄4" Mortise Latch
LOCK MATERIAL
Zinc Alloy
FUNCTIONS
Multiple Functions
MEMORY
Stores up to 80 User Codes
USER TYPES
Code
ORIENTATION
Vertical
SPINDLE
Two part 5⁄16" (8mm) spring loaded spindle
POWER
4x AA
SUITABLE FOR
-Internal -External
OPERATIONS
Up to 200,000 per set of 4 x AA batteries
HANDED
Non Handed - Locks will fit doors hung on the left or right
LOW BATTERY WARNING
Red LED will flash on opening to indicate low battery
KEY FEATURES
- Mortise Latch
- Lever and knob handles available
- Over 200,000 operations from 4 x AA cells (supplied)
- Tamper time out and low battery warning
- Connections for remote release
- Alarm release included
- Internal and external applications
- Suited for residential, commercial and non-commercial
DOWNLOADS
↓ Installation Instructions
↓ Installation Template
↓ CL4000 Brochure
↓ CL4000 Documentation
↓ Programming And Operating Instructions
THE LOCK HAS FITTED AS STANDARD TWO ALARM RELEASE TERMINALS.
- REM1 is used to open the lock from a reception desk button or answer phone.
- REM2 can be linked to an alarm system which, when activated by a momentary contact, will release the door for 30 minutes. This allows emergency personnel to enter the room to rapidly check that no one has been overlooked.
CLEAN
Clean by Codelocks is an optional finish which can be applied to any of our Codelocks products. Clean by Codelocks features an ISO certified* photocatalytic coating which, when applied to our locks, offers enhanced protection against viruses, bacteria, germs and other environmental toxins.
The coating utilizes a process called photocatalytic oxidation, which means that the coating converts harmful bacteria and germs into a non-toxic compound, resulting in a clean and hygienic surface. The clear coating combats SARS-CoV-2 coronavirus (COVID-19) and can reduce bacterial growth by 99.96%*, providing an additional measure of protection over sanitization. Application lead time 7 to 10 working days.