K-Array Vyper-KV25R II Loudspeaker
VYPER-KV25R II LOUDSPEAKER
VYPER-KV25R II LOUDSPEAKER
The Vyper-KV25R II is an ultra-flat passive loudspeaker comprised of four 1” neodymium magnet transducers each, housed in an elegant yet sturdy aluminum chassis, designed for in-wall recessed installations.
The four closely-spaced cone drivers provide true line array characteristics: Phase Coherence, Low Distortion and Focused Listening in both the near field and at a distance from the speaker.
Two different values of impedance (8Ω – 32Ω) allow to connect up to 8x Vyper-KV25 II loudspeakers at 32Ω impedance to the same 4Ω amplifier output channel, which eliminates the need for 70V lines for wide distributed installed systems where pristine sound, intelligibility and elegance are mandatory.
INFORMATION
TYPE
Line Array
MATERIAL
Aluminum
RATED POWER
75 W
WEIGHT
0.4 kg
COVERAGE
- Vertical : 25°
- Horizontal : 140°
NOMINAL IMPEDANCE
- 8 Ω Selectable
- 32 Ω Selectable
COMPONENTS
All Vyper-KV25 components are designed by the K-array R&D department and are custom-made under the K-array quality control system.
CONNECTORS
2PIN Euroblock Connector
FINISHES
- 24K Gold -Polished
TRANSDUCERS
4 x 1" Neodymium Magnet Woofers
FREQUENCY RESPONSE
150 Hz – 18 kHz (-6 dB)
MODELS
- KV25R II black model
- KV25RW II white model
- KV25RX customizable RAL color and finish (box + grille)
DIMENSIONS
- Height : 270 mm (10.63 in.)
- Width : 50 mm (1.95 in.)
- Depth : 37 mm (1.45 in.)
IP RATING
- IP65
- With dedicated preset
- Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
FINISHES
-White -Gold -Pink Gold -Polished Steel -Black
