K-array Thunder-KS2P I Subwoofer

THUNDER-KS2P I SUBWOOFER

K-array Thunder-KS2P I Subwoofer

THUNDER-KS2 I

Subwoofer

The Thunder-KS2P I is a compact passive subwoofer featuring a long excursion 18” neodimium magnet woofer with 3” voice coil.

The Thunder-KS2P I features 2x SpeakON NL4 connectors that allow to input the signals from external active systems or amplifiers, with either a 2-wire or a 4-wire cable, as well as route the signal to other loudspeakers.

K-array Thunder-KS2P I Subwoofer

INFORMATION 

K-array Thunder-KS2P I Subwoofer

IP RATING

IP 54

NOMINAL IMPEDANCE

8ohm

WEIGHT

34 kg (75 lb)

TYPE

Passive Subwoofer

RATED POWER

1400W peak

MAX SPL

137 dB

TRANSDUCERS

18" neodymium magnet woofer

PRODUCTION

Made in Italy

K-array Thunder-KS2P I Subwoofer

COVERAGE

-Omni -2 x Speakon NL4

FREQUENCY RESPONSE

35 Hz - 150/450 Hz (-6 dB) crossover dependant

CONNECTORS

2PIN Euroblock Connector (included)

CROSSOVER

-External DSP-controlled -Low Pass @ 150 Hz up to 450 Hz -Preset dependant

COLOR

- Black
- White
- Custom RAL

K-array Thunder-KS2P I Subwoofer
K-array Thunder-KS2P I Subwoofer

MATERIAL

Polyurea Coated Birch Plywood

DETAILS

With dedicated preset
- Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- Included 17 mm (0.7 in) removable rubber feet
- In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.New materials and design are introduced into existing products without previous notice.

DIMENSIONS

- Width :650 mm
- Height : 500 mm
- Depth : 580 mm

K-array Thunder-KS2P I Subwoofer

WIRE

2-wire Or A 4-Wire Cable