Gaggenau Vario Gas Cooktop 400 Series - VG415215

VARIO GAS COOKTOP 400 SERIES - VG415215

VARIO GAS COOKTOP 400 SERIES - VG415215 

Highlights 

- Multi-ring burner with up to 6 KW
- Full electronic power level regulation on 12 levels

Gaggenau Vario Gas Cooktop 400 Series - VG415215
Gaggenau Vario Gas Cooktop 400 Series - VG415215

- Solid stainless steel knob, also selectable with black robust finishing, for precise control and personalisation
- Precision crafted 3 mm stainless steel
- For surface mounting with a visible edge or for flush mounting

INFORMATION

FREQUENCY 

50; 60

GROSS WEIGHT 

16.9

ENERGY INPUT 

Gas

RESIDUAL HEAT INDICATOR 

Separate

LOCATION OF CONTROL PANEL 

External Control

BASIC SURFACE MATERIAL 

Brushed Stainless Steel

BUILT-IN / FREE-STANDING 

Built-in

PRODUCT NAME/FAMILY 

Vario/Domino Gas Hob

WIDTH OF THE APPLIANCE 

380

DIMENSIONS

300 x 500 x 600 (Packed)

DIMENSIONS 

158 x 380 x 520 (Unpacked)

NET WEIGHT 

14.9

COLOR OF SURFACE 

Stainless Steel

VOLTAGE 

220-240

CONNECTION RATING 

15

FUSE PROTECTION 

2

LENGTH ELECTRICAL SUPPLY CORD 

140

GAS CONNECTION RATING 

6000

COLOR OF FRAME 

Stainless Stee

CONNECTION 

Total connected load gas 6.0 KW. Total connected load electric 15 W. Connecting cable 1.4 m with plug.

INSTALLATION ACCESSORIES 

- VA420004 Connection strip for combination with other Vario appliances of the 400 series for flush mounting
- VA420010 Connection strip for combination with other Vario appliances of the 400 series for surface mounting
- VA440010 Stainless steel appliance cover with mounting strip

OPTIONAL ACCESSORIES 

- WP400001
- Wok pan made of multiple-layer material

REQUIRED INSTALLATION ACCESSORIES 

- CKG410000 Black knob 400 series for VG 415
- CKG410010 Stainless steel knob 400 series for VG 415

SAFETY 

Electronic flame monitoring with automatic re-ignition. Residual heat indication. Safety shut-off.

FEATURES 

Simmer function. Cast iron pan support with flat, continuous pot surface. Brass burner rings.

DATA 

Multi-ring burner with up to 6 KW Full electronic power level regulation on 12 levels Solid stainless steel knob, also selectable with black robust finishing, for precise control and personalisation Precision crafted 3 mm stainless steel For surface mounting with a visible edge or for flush mounting Precise and reproducible flame size Automatic fast ignition, electronic flame monitoring with automatic re-ignition Simmer function for cooking on a very low output level Can be combined perfectly with other Vario appliances of the 400 series

TOTAL NUMBER OF POSITIONS THAT CAN BE USED AT THE SAME TIME 

1

MIN. REQUIRED NICHE SIZE FOR INSTALLATION (HXWXD) 

134 x 360 x 492

COOKING ZONES 

1 multi-ring wok burner (300 W – 6000 W), suitable for pots up to max. ø 32 cm.

HANDLING 

Control knobs with illuminated ring, cooking zone and output level markings. One-handed operation. Full electronic control in 12 output levels for exact power level regulation plus simmer function. Automatic fast ignition

ACCESSORIES 

1 x WOK attachment ring

INSTALLING  

- If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs. Special nozzles can be ordered as spare parts.
- Plan for an electrical connection (the appliance is not operable without power supply). Air intake from ab
- No intermediate shelf required. Rear panel and wall trims must be heat-resistant and consist of a nonflammable material.
- A minimum clearance of at least 150 mm from adjacent heat-sensitive furniture or contact surfaces must be observed or thermal insulation fitted. If operated next to the downdraft ventilation VL 414, the ventilation moulding AA 414 is recommended to ensure maximum performance of the cooktop.
- The minimum distance to a ventilation above is shown at the planning hints for the individual ventilation product. Appliance can be snapped into the worktop from above. Appliance weight: approx. 15 kg.

PLANNING NOTES 

- Depending on the type of installation (surface-mounted or flush-mounted, with or without an appliance cover), the specific location of the cut-out and the knob positions may vary. The drawing "Installation of the control knob" must be observed if the panel is more than 23 mm thick (there must be a recess at the rear).
- If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided. The bearing capacity and stability, in the case of thinner worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads. Additional instructions for flush mounting: Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.
- The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining. The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.