Sabiana Janus ECM Heaters

Janus ECM HEATERS

JANUS ECM HEATERS

The Janus unit heaters can be used to economically cool industrial, commercial and sporting facilities, transforming a traditional heating system using unit heaters into a system that can also be used in the summer months, significantly improving the working conditions.

Sabiana Janus ECM Heaters

The condensate collection tray is built into the appliance, while two-speed motors are fitted as standard. Upon request, controls with thermostat can also be supplied. The Janus unit heaters are made in 4 sizes, each with 3 and 4 row coils, for a total of 8 models, with heat outputs from 16 to 104 kW and cooling capacities from 5 to 28 kW.

INFORMATION

PRODUCT TYPE 

Heaters

PRODUCTION 

Made In Italy

BRAND 

Sabiana

USE 

Ceiling Installation

REFERENCE

46F43

VOLTAGE

400V/50Hz

COOLING CAPACITIES

5 to 28 kW

HEAT OUTPUTS

16 to 50 kW a

MATERIAL

Galvanized Steel

SIZES

Sizes, each with 3 and 4 row coils.

UNIT HEATERS ARE MADE

4 sizes, each with 3 and 4 row coils

COLLECTION

The condensate collection tray is fitted inside the unit

USED

- Economically Cool Industrial
- Commercial And Sporting Facilities

Sabiana Janus ECM Heaters

MAINTENANCE

The main casing is manufactured from galvanized prepainted steel (1 mm thick) finished in light grey (RAL 9002), and it is assembled from three component parts, assembled with self-tapping screws for quick maintenance on the heat coil. The use of hot dip galvanised and pre-painted steel ensures consistency and excellent protection against corrosion.

CONTROL

Controls with thermostat can also be Supplied.

TECHNICAL CHARACTERISTICS OF THE MAIN COMPONENTS

- The main casing is manufactured from galvanized prepainted steel (1 mm thick) finished in light grey (RAL 9002), and it is assembled from three component parts, assembled with self-tapping screws for quick maintenance on the heat coil. The use of hot dip galvanised and pre-painted steel ensures consistency and excellent protection against corrosion.
- The standard motor fitted is a hermetically sealed and is maintenance free. The motor is 2 speeds, 3 phase, single voltage 400V/50Hz, protection IP55, class B, with klixon thermal protection that is triggered in the event of overheating. The rotation speed can be reduced by passing from delta to star connection.
- Coil with large heating surfaces with copper pipe and in aluminium fins.
- The condensate collection tray is fitted inside the unit. Made from galvanized steel insulated with polyolefin (PO) foam (class M1).