Olimpiasplendid Kit Sherpa Flex Box As Heat Pump
KIT SHERPA FLEX BOX AS HEAT PUMP
KIT SHERPA FLEX BOX AS HEAT PUMP
Sherpa Flex Box AS kit is the technical cabinet that makes it possible to create a compact system in heat pump with high installation flexibility.
The multi-purpose heat pump (Sherpa Aquadue) and the class C storage tanks make it possible to obtain a very high energy efficiency of the system, even in outdoor installation.
FEATURES
TECHNICAL ACCUMULATION 28 LT - STAINLESS STEEL
(standard on return from the system) To ensure efficient and safe operation of the heat pump (class C)
DOMESTIC WATER STORAGE TANK 150 LT - STAINLESS STEEL
High thermal insulation 50 mm in EPS with graphite to minimise dispersions (class C)
FREESTANDING TECHNICAL CABINET
For maximum installation flexibility with a single product. In galvanised steel.
INFORMATION
BRAND
Olimpiasplendid
PRODUCT TYPE
Heat Pump
PRODUCTION
Made in Italy
DIMENSIONS (W X D X H)
998 x 415 x 2280 mm
HEAT PUMP SIZES
For Heat Pump Sizes 8 And 10
INSTALLATION
Even in outdoor installation
WATER CONTENT
The water content of the distribution network and of the fan coil units must be at least 10 litres (refer to the product installation manuals).
CONTROL
Remote Control Kit
COMPATIBILITY WITH
- SHERPA AQUADUE S2 E 4 (UI Sherpa Aquadue S2 E Small 02042)
- SHERPA AQUADUE S2 E 6 (UI Sherpa Aquadue S2 E Small 02042)
- SHERPA AQUADUE S2 E 8 (UI Sherpa Aquadue S2 E Small 02042)
- SHERPA AQUADUE S2 E 10 (UI Sherpa Aquadue S2 E Small 02042)
KEY FEATURES
System connections from below or from the back Condensate trap to prevent any dripping of the condensation on the bottom of the cabinet Possible combination with display remote control kit (B0931) The distribution and heat emission network downstream of Sherpa Flex Box AS must ensure the circulation of the minimum flow rate of the heat pump in all operating conditions by means of 3-way valves or by-pass systems, in addition, for heat pump sizes 8 and 10, the water content of the distribution network and of the fan coil units must be at least 10 litres (refer to the product installation manuals).
INSTALLATION TEMPLATE
