Russellhobbs Easy Fill Iron
EASY FILL IRON
EASY FILL IRON
Code : 24420
The Russell Hobbs Easy Fill Iron is, as its name suggests, designed to make ironing easy. It can be filled and ready to use in under 5 seconds.
And, thanks to its 50%* smoother glide ceramic soleplate, the Easy Fill Iron tackles wrinkles with ease. Features include a powerful 150g shot of steam, 50g continuous steam, anti-drip, self-clean and anti-calc function.
FEATURES
FILL UP FASTER – IRON FOR LONGER
Why stop to fill up the tank every five minutes? The Easy Fill’s generous 320ml water tank has a unique faster fill feature and can be topped up in under 5 seconds. It also comes with a host of powerful and practical features to help you glide through even the most daunting laundry piles.
50%* SMOOTHER SOLEPLATE FOR EFFORTLESS IRONING
We’ve all struggled with deep-set creases in fabric such as denim or linen. The Easy Fill Iron’s smooth glide ceramic soleplate takes on these challenges with ease and speed, and without the frustration of clothes sticking to the soleplate even on a high heat setting.
GLIDE THROUGH STUBBORN CREASES
Its 50%* smoother ceramic soleplate gives all of your laundry a non-stick ironing experience, gently smoothing the creases in both delicate and more robust fabrics. It gives you a powerful 150g shot of steam and 50g continuous steam on a single fill.
INFORMATION
BRAND
Russellhobbs
PRODUCTION
Made In UK
STEAM SHOT
150g Steam Shot
PRODUCT TYPE
Iron
CLEANING
-Unplug the iron, and sit it on its heel to cool. -Clean the outside surfaces of the appliance with a damp cloth. -Remove spots from the sole plate with a little vinegar.
SPRAY
Water spotting affects some fabrics. Test this out first on a hidden part of the fabric.
-Lift the iron off the fabric. -Aim the spray nozzle at the fabric. -Press the sbutton – you may have to press it 2 or 3 times to pump water through the system.
MODEL CODE
24420
DOWNLOAD
↓ Data Sheet
STEAM IRONING
- To steam iron, set the temperature control to S or higher.
- Wait till the light goes out, then start ironing.
- Set the steam control to the setting you want, S = no steam, h= high steam.
PARTS
- Light
- Mark
- Heel
- Steam control
- Spray nozzle
- Soleplate
- Water inlet
- Water inlet cover
- Temperature control
FEATURES
- Easy Fill 320ml water tank
- 150g steam shot
- 50g continuous steam
- Auto-shut off function
- Anti-drip feature
- Self-clean and anti-calc feature
- Easy to store 3m Power Cord
- Ceramic soleplate for a 50% smoother glide
FILLING/REFILLING
You may use the iron with tap-water, but if you live in a hard water area, you should use distilled water (not chemically descaled or softened water). If you buy distilled water, check that it’s suitable for use in irons.
-Unplug the iron. -Wipe up any spillage. -Set the temperature control to -To open the water inlet, press the water inlet cover downwards until it clicks. -Don’t fill past max, or water will escape in use. -To close the water inlet, press the water inlet cover downwards then release it. Make sure that the water inlet cover is closed before using the iron. -Fill from a jug or directly from a tap. Fill slowly, to let the air in the reservoir escape, otherwise you’ll cause an air lock and the water will overflow.
VERTICAL STEAMING
Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics
- Check that pockets, turn-ups, and cuffs are empty.
- Leave 4 seconds between shots, to let the temperature build up.
- Check that there’s water in the reservoir. 1. Set the temperature control to max.
- Check that there’s nothing behind the fabric that may be damaged by the steam.
- Check that there’s adequate ventilation behind the fabric, otherwise moisture may build up, causing mildew.
- Hold the iron close to (but not touching) the fabric. 3. Press the S button (you’re using the “shot of steam” function vertically).
SELF CLEAN
To avoid scale build up, use the self clean function at least monthly in normal water areas, more often in hard water areas. You’ll need a basin or a large bowl to catch the water coming out of the soleplate.
- Fill the reservoir to the max mark.
- Stand the iron on its heel.
- Follow the steps under After use.
- When the reservoir is empty, release the C button.
- Unplug the iron, and stand it on its heel to cool.
- Put the plug into the power socket and wait till the light goes out.
- Hold the iron over the basin or bowl, with the soleplate down.
- Set the temperature control to max and set the steam control to S.
- Press the C, and hold it down. 7. Gently move the iron to and fro, over the basin or bowl.
- Water and steam will wash scale and dust through the soleplate, and into the sink.
