Systemtronic MTFT series Stand
MTFT SERIES STAND
MTFT SERIES STAND
Designed by STC Studio
The MTFT series consists of two central axis tables, one prepared to work standing up and the other sitting down. It meets the demands of current technology by adapting two TFT / LCD monitor mounts, which comply with VESA 75 or VESA 100 regulations. The comfort provided by this mount is supported by the infinite number of possible positions it can adopt.
INFORMATION
BRAND
Systemtronic
PRODUCT TYPE
Stand
COLLECTION
Mtft Series
USE
Indoor
DOWNLOADS
↓ Data Sheet
↓ Information Request
WOOD
We recommend using a cloth or cleaning products for natural wood. Avoid using products containing solvents and/or alcohol.
POLYESTER PAINT
For dry dirt (dust), use a damp cloth. For greasy/oily stains (fingerprints), wipe with a sponge with water and dishwashing liquid. Rinse with a damp cloth. Avoid using products containing solvents and/or pure ethyl alcohol.
TUBE
30x15mm And 120mm Long
AVAILABLE
A Holder For The Monitor
SUSTAINABILITY
The used paints do not contain solvents, do not consume water and do not generate emissions or waste. The result is a lower environmental impact.
SECTION
A,B,C
WHEELS
5
BASE
Base of 530x510mm, with four non-slip to place the CPU with total security, giving even greater stability to the table. The ends of the tubes are protected with plastic ferrules.
ALUMINIUM-METAL-GLASS-MELAMINE-PLASTIC
We recommend using normal cleaning products for delicate surfaces. Alcohol, solvents and abrasive agents must be avoided.
FIXED
Supplied with 5 wheels of polyamide-6 of 48mm in diameter, two of them with brake, allowing its free and simple displacement due to the stability of the table, and a fixed positioning free of unwanted movements.
SECTION B AND C
The panels (B and C) are made of melamine MDF 13 mm thick with lacquered edges, 455x315mm (rectangular) and 715x440mm (shape) respectively, both fastened by screws
SECTION A
The upper arm (A) is made of cold rolled metal formed by an oval tube 30x15mm and 120mm long, joined by welding at its base to a round tube of Ø50x49mm and at the other end to a round tube of Ø30x27mm. Both unions are covered with plastic trims. Available in a holder for the monitor (suitable for monitors that comply with VESA 75 or VESA 100) U-shaped wrapping the end of the arm and attached to these, using a bolt and two screws for fixing. With this we will achieve the desired rotary movement to guide the plasma monitor. Next to the U-shaped clamp, the clamping piece is available to the plasma monitor
SECTION B
The keyboard arm (B) is made of cold rolled metal and is formed by oval tube 40x20 and 289mm long, joined by welding on its base to a round tube of Ø50x49mm and at the other end to a round tube of Ø30x60mm. Both unions are covered with plastic trims. They are arms designed to allow flat and free rotation with total stability that together with the board form a turning radius of 465mm.