Olimpia Splendid Alyas Pro E Air Conditioner
ALYAS PRO E AIR CONDITIONER
ALYAS PRO E AIR CONDITIONER
The high wall mono-split air conditioner with a superior heating performance (compared to standard splitters) in the coldest climate areas. The external operating temperature limit is -22°C. Alyas Pro E also has a multi-filter system consisting of an anti-dust electrostatic filter and active carbon filter (to combat unpleasant odours).
FEATURES
HIGH EFFICIENCY
High-performance R32 refrigerant gas with maximum technological efficiency, up to energy class A+++.
LOW-ENVIRONMENTAL IMPACT GAS
It uses R32 refrigerant, which has a greenhouse effect reduced by almost 70% (compared to R410A).
HIGH PERFORMANCE IN COLD CLIMATES
In the heating of the more rigid climatic zones, it has a higher performance than the common split units (operating limit of the external ambient temperature -22°C).
PURE SYSTEM
Equipped with a multi-filtering system, consisting of an electrostatic filter (with anti-dust function) and activated carbon filter (effective against unpleasant odours).
INFORMATION
BRAND
Olimpia Splendid
PRODUCT TYPE
Air Conditioner
MOUNTING
Mounted on Wall
FILTER
Electrostatic filter and active carbon filter
REFRIGERANT GAS
R32
COLLECTION
Alyas
PRODUCTION
Made in Italy
TWO MODELS AVAILABLE
Alyas Pro E Inverter 9 and 12
EXTERNAL AMBIENT TEMPERATURE
-22°C
FEATURES
- Cooling
- Heating
- Dehumidification and ventilation
USE
Indoor
SYSTEM
Multi-filtering System
HEAT PUMP APPLIANCES
- During operation in heating mode, condensate is produced in the outdoor unit due to defrosting, which must be able to run-off freely to prevent stagnation. - When positioned on a flat surface, a draining channel must be created around the unit that goes directly into the rainwater collection well of the water network (figure 15).- In the case of installation on a balcony or terrace, it must be possible to position a recipient under the unit, possibly in galvanised sheet or stainless steel (preferable), with drain pipe that flows directly into the gutter.
-Another option (figure 16) is to position the gasket (6) on the fitting (5) and then insert the latter into the hole made on the bottom of the outdoor unit and turn it by 90° to fix it securely. - Connect a rubber hose (not supplied) to the fitting (6) if water is drained from the outdoor unit in heating mode.
PERFORMANCE
Golden Fin treatment on the battery of the outdoor unit, to prevent the corrosive action of atmospheric agents and improve performance efficiency.
COP
4.41 - 3.7
EER
4.4 - 3.6
DISPLAY
Display LED
TIMER
24 H
OUTPUT POWER
- Cooling mode rating : 2.64 kW - 3.52 kW
- Heating mode rating : 2.86 kW - 3.81 kW
FUNCTIONS
-Timer, Auto, Eco, Sleep, Silent, Turbo, Auto-restart and Auto-diagnosis functions -Swing function : oscillation of the flap for better air diffusion in the environment. -Auto-Restart function : After a power failure, it restarts at the last function set. -Auto-Diagnosis function : In the event of a failure, the display shows the error c ode. -Follow Me function : The remote control thermostat allows correct temperature control where the occupants are present in the room.