Olimpia Splendid Sherpa Aquadue Tower S2

Sherpa Aquadue Tower S2

Olimpia Splendid Sherpa Aquadue Tower S2

SHERPA AQUADUE TOWER S2

The AQUADUE® patented technology thanks to the combination of an air-water cycle with inverter technology and a second stage water-water guarantees the cooling or the heating contemporary to the DHW production at high temperature, indipendently from the outside temperature.

INFORMATION

Olimpia Splendid Sherpa Aquadue Tower S2

BRAND 

Olimpia Splendid

USE

Indoor

PRODUCT TYPE 

Air-water Heat Pump

FUNCTIONS

- Cooling
- Heating

ENERGY RECOVERY

Cooling + Dhw At A High Temperature

HEATING

DHW at a High Temperature

PRODUCTION

Made in Italy

FEATURES

ABSOLUTE CONTINUITY AVAILABILITY OF DHW

Guaranteed By The Redundancy Of The Dual Cooling Cycle System

PRODUCTION OF DHW

(Domestic Hot Water) at high temperature, up to 75 ° C in the integrated storage tank.

HOLIDAY

Holiday and weekly programmer: heating/cooling, DHW, night-time.

REFRIGERANT GASES

R32* and R410A* for the reversible circuit dedicated to air conditioning and R134A** for the high temperature circuit dedicated to the production of DHW.

CLIMATIC CURVES

with external air temperature probe: two curves available, one for cooling and one for heating. The climatic curves are used to vary the temperature of the water supplying the system according to the external climatic conditions, adjusting the thermal needs of the building, in order to achieve energy savings.

ENERGY EFFICIENCY CLASS

In average climate heating up to: A+++ (35°C) and A++ (55°C)

ANTI-LEGIONELLA CYCLES

That Can Be Avoided Using The High Temperature Refrigeration Cycle.

BUILT-IN 150 L

High efficiency storage tank with an exchange battery surface equal to 1.5 m2.

CONFIGURABLE SET POINTS

Two set points in cooling, Three set points in heating (one of which for DHW): the set points can also be selected via remote contact.

POWERS AVAILABLE

4 Powers with refrigerant R32: 4-6-8-10 kW singlephase and 3 Powers with refrigerant R410A: 12-14-16 kW single-phase and three-phase

AQUADUE TECHNOLOGY

Olimpia Splendid Sherpa Aquadue Tower S2
Heating Mode

HEATING MODE

+DHW at high temperature Production of DHW guaranteed regardless of the outside temperature for optimal operation all year round, not guaranteed by traditional heat pumps.

Olimpia Splendid Sherpa Aquadue Tower S2
Cooling Mode

COOLING MODE

+DHW at a high temperature with energy recovery The energy normally dissipated outside is recovered and used to produce DHW up to 75°C.

DETAIL

DHW AND COMFORT AT THE SAME TIME

The two interconnected refrigerator cycles allow the decoupling of the heating/cooling from the DHW production, enabling them to operate in parallel, avoiding thus interruptions in the domestic comfort supply.

Olimpia Splendid Sherpa Aquadue Tower S2

75°C DOMESTIC HOT WATER

High temperature DHW storage allows a reduction of the boiler volume up to 30%, to heat bathroom heater radiators and avoids highly energyconsumpting anti-legionella cycles that are normally performed through the use of electrical resistances.

Olimpia Splendid Sherpa Aquadue Tower S2

LOW GWP GAS

In sizes up to 10 kW, it uses the R32 refrigerant, characterised by greater efficiency and a greenhouse effect reduced by almost 70% (compared to R410A).

Olimpia Splendid Sherpa Aquadue Tower S2