Olimpiasplendid Sherpa Tower S3 heat Pumps
SHERPA TOWER S3 HEAT PUMPS
SHERPA TOWER S3 HEAT PUMPS
Olimpia Splendid's air-to-water heat pump, with R32 refrigerant and integrated 200 litre storage tank, stands out for its high energy efficiency class, both in heating and domestic hot water production, for its compact size (60x60 cm) and great ease of installation,
Sherpa Tower S3 can be positioned even in the tightest spaces and makes installation particularly "clean", thanks to the flexibility of the refrigeration and plumbing connections and the complete equipment.
Great ease, finally, also on the controls front: through a configurable touchscreen user interface it is possible to customise comfort and DHW requirements and optimise energy performance, quickly and intuitively.
INFORMATION
COMPONENTS INCLUDED
System filling valve, 3-way valve and 2 expansion valves (technical water and DHW)
PROGRAMMER
Daily, holiday and weekly programmer: Heating/cooling, dhw, night.
BRAND
Olimpiasplendid
PRODUCTION
Made in Italy
ENERGY EFFICIENCY CLASS
Energy efficiency class in average climate heating up to: A+++ (35°C)
and A++ (55°C)
EFFICIENCY
Storage tank 200 L high efficiency (tower version only)
OPERATING LIMITS
Down to -25°c, + 43°c (see technical manuals for details)
PRODUCT TYPE
Inverter Air-water Heat Pump
MIXER
Integrated thermostatic mixer
STANDARD DOUBLE-STAGE ELECTRIC HEATING ELEMENTS
Configurable as single or double-stage, it can be activated to support the heat pump, checking, via the electronic control, the actual heat output of the heat pump. Each stage is activated according to the actual need for thermal power, in order to optimise electricity consumption.
DOWNLOADS
↓ Product catalogue
↓ Installation manual IDU
↓ Installation manual ODU
↓ CE Declaration
↓ Energy Label
↓ Dimensional drawing
CONFIGURABLE SET POINTS
Two configurable set points in cooling, Three configurable set points in heating (one of which for DHW): the set points can also be selected from a remote contact.
MANAGEMENT
Complete management of the anti-legionella cycles.
SUPPLIES DHW
Supplies DHW with temperature up to 60 ° C..
TECHNICAL DRAWING
POWERS AVAILABLE
4 Powers with refrigerant R32: 4-6-8-10 kW singlephase
and 3 Powers with refrigerant R410A: 12-14-16 kW single-phase and three-phase.
CLIMATIC CURVES BASED ON THE EXTERNAL AIR TEMPERATURE
Two curves available, one for cooling and one for heating. The climatic curves are used to vary the system temperature according to the external climatic conditions, adjusting the ‘’heat input to the building’s thermal needs, in order to achieve energy savings.
REFRIGERANT GAS
Refrigerant gas R32* or R410A*
STORAGE
Storage tank 200 L high efficiency.
FEATURTES
LOW GWP GAS
In sizes up to 10 kW, it uses the R32 refrigerant, characterised by greater efficiency and a greenhouse effect reduced by almost 70% (compared to R410A).
60°C DOMESTIC HOT WATER
Sherpa Tower S2 provides domestic hot water with temperatures up to 60 ° C
COMPACT TECHNOLOGY
The engineering of the components and the reduced shapes allow it to be installed inside a kitchen cabinet.performance.
