K-Array Thunder-KS1P I Subwoofer
THUNDER-KS1P I SUBWOOFER
THUNDER-KS1P I SUBWOOFER
The Thunder-KS1P I is a compact passive subwoofer featuring a long excursion 12” cone driver with 3” voice coil.
The Thunder-KS1P I features 2x SpeakON NL4 connectors that allow to input the signals from external active systems or amplifiers, with either a 2-wire or a 4-wire cable, as well as route the signal to other loudspeakers.
INFORMATION
CROSSOVER
- Preset dependant
- External DSP-controlled
- Low Pass @ 150 Hz up to 450 Hz
BRAND
K-Array
PRODUCT TYPE
Subwoofer
RATED POWER
1200W peak
WEIGHT
18 kg (39.7 lb)
CONNECTORS
- IN+Link 1+/1- (parallel), Link 2+/2-
- Link 1+/1- , IN+Link 2+/2- (Default)
DOWNLOADS
MATERIAL
Polyurea coated birch plywood
TRANSDUCERS
12" neodymium magnet woofer
DISCLAIMER
-Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers. -New materials and design are introduced into existing products without previous notice.
NOMINAL IMPEDANCE
8ohm
IP RATING
54
DETAIL
-With dedicated preset -Included 17 mm (0.7 in) removable rubber feet -Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m. -In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer.
WIRE CABLE
- 2-wire
- 4-wire cable
COVERAGE
- Omni
- 2 x Speakon NL4