Beechovens Grill Ovens Rgo1250
GRILL OVENS RGO1250
GRILL OVENS RGO1250
Rectangular Grill Oven – Wood or Gas or Electric fired.
Our cooking equipment is recognised around the world by the distinctive Beech Ovens features and is complimented by purpose-designed accessories.
Robust gas fired grills can be mounted in any of the Stone Hearth Oven range as an accessory or as a stand-alone Grill oven. The grill has heat from below and above resulting in a faster more efficient cook.
INFORMATION
CONSTRUCTION
High grade castable ceramic encased in 5mm steel housing supplied in 2 major sections with removable legs. 50mm insulation covers oven body, 25mm air gap between insulation and noncombustible façade material. 75mm stone hearth floor above 25mm insulating board and 5mm plate.
HEIGHT
1730 mm
EXT DIAMETER
1600 mm
FIRING TYPE
Wood, Gas or Gas Back-up (Wood and Gas) or Electric (see separate spec sheet)
PURPOSE
Wood/Gas/Electric Fired stone hearth oven for cooking Pizza and other dishes
EXHAUST REQUIREMENTS
Under Canopy/Hood OR Beech Spray Filter (Wet Scrubber) OR Flue Transition.
EASY INSTALLATION
All ovens can be made to fit through a standard doorway or elevator for easy installation.
CONTROLLED
All gas systems are thermostatically controlled with the option of a display burner for added visual impact.
INT WIDTH
1250 mm
INSTALLATIONS
Over 3,000 installations in 40 countries.
COLLECTION
Round
WARRANTY
Oven body has a limited four (4) year warranty, gas system one (1) year.
INSTALL FEATURES
We can install features such as spotlights, viewing windows, multiple openings/doors, char grills and rotisseries where there is sufficient size.
SPECIAL REQUIREMENTS
Façade and Oven surround to be made of non-combustible material. Tube Burner Vent to be connected via ventilation panel in front façade panel below oven door (See Installation and Operation Manual for details) Access and ventilation panel to both above and below oven - minimum 600mm x 600mm Metal infill required between oven spigot and façade to prevent hot air and flames entering the façade cavity.
PRODUCTION
Made In Australia
DOWNLOADS
↓ RGO1250 Pdf
↓ Specification
GAS
-Gas Back-up – 80mJ (75825 BTU) NAT/LPG (Tube Burner) -Full Gas – 70mJ (66347 BTU) + 80mJ (75825 BTU) NAT/LPG (Display + Tube Burner) -Grill – 50mJ (47391 BTU) NAT/LPG (Independent supply)
SAFETY
-Oven and associated systems are CE, UL and AS4563 certified.
-UL Tested to Subject 2162 (Wood/Gas Fired). Complies to USA “ANSI-NSF standard 4”
-Exterior temperatures below 50°C. -Compliant Gas systems with flame failure device.
DETAIL
Combining superior cooking ability, efficiency and flexibility of design, the Grill Ovens take grilling to another level.
ACCESSORIES
Full Premium Tool Set (350mm Loading Peel, 230mm SS Utility Peel, Brass Floor and Spigot Brush, 3 tool SS Hanging Rack and 350mm pizza Rocker Cutter - SS Shovel, SS Rake WOOD ONLY) Lower Access/Services Panel with inbuilt Operator Panel Stainless Steel Hearth (Optional – shown in image) Spray Filter (Optional – shown in image)
FEATURES AND OPTIONS
-We can fabricate any size oven you wish with any gas configuration -All Beech Ovens can be wood fired, combination wood & gas or fully gas fired.
-Unique oven design enables relocation. -Greatest thermal mass of any pizza oven in the world.
MEP RATINGS
-Gas Connection – 19mm (3/4”) line. -Electrical (for Gas) – 220-240VAC @ 50Hz 1 Phase 10 AMP -Spray Filter Water Inlet– 15mm @ 30 L/Hr. -Spray Filter Water Outlet – 40mm Copper Drain – To drain via tundish visible to operator. -Spray Filter Water Solenoid – 220-240VAC @ 50Hz 1 Phase 10AMP (Linked to exhaust fan – Fan ON = Solenoid ON) -Spray Filter Exhaust Ratings – 300mm x 300mm connection, 150Pa Static Pressure, 450l/sec
-Spray Filter Cool Air Make-up unit – Ensure a fresh air supply is available. No connection required.
STAINLESS STEEL PLUG
Stainless steel plug door for oven mouth.
ENCASED
The only pizza oven encased in 6mm steel