The Modern Fan Ball Flush | 42″ Fan
Ball Flush | 42″ FAN
LAPA | 50″ FAN
Ceiling fan manufacturers are required by federal law to publish an EnergyGuide label for all models in a standardized format, including watts used, cubic feet of air moved per minute (CFM), a resulting CFM per watt efficiency value and an estimated annual cost to use the product.
information
REVERSE SWITCH
153mm x 18mm AC motor with reverse switch on fan body
BRAND
The Modern Fan
PRODUCT TYPE
Fan
CHOOSE LIGHT OPTION
- No Light
- 17W LED
TECHNICAL DRAWING
HIGH SPEED PERFORMANCE DATA
Based on DOE standardized test method.
- RPM: 270
- CFM/Watt: 59.84
- Watts (fan only): 57.12
- CFM (Cubic Feet per Minute): 3,418
COMPATIBLE
Slope compatible up to 33°; adapter available for slopes up to 45°
COLLECTION
Ball
WEIGHT
16 lbs (7.3 kgs)
BLADES
42” span, plywood blades
DESIGNER
Ron Rezek
LOCATIONS
ETL listed for dry and damp locations
DOWNLOADS
↓ Data Sheet
↓ Installation Instructions
ENERGY GUIDE DATA
Representing weighted averages of high speed and low speed performance based on DOE/FTC standardized reporting criteria. Assumes typical use (excluding light).
- Average Energy Use : 37 Watts
- Average Airflow : 3,215 CFM
- Yearly Energy Cost : $10.00
- Average Efficiency : 69 CFM/Watt
FINISH
- Gloss White
- Brushed Aluminum
CONTROL OPTIONS
FAN SPEED ONLY (-001)
A basic fan control used to operate a fan only (no light). Provides four speeds and comes with decora style wall plate (white only).
FAN & LIGHT - 3 WIRE (-002)
For operation of a fan with light. Requires three wires (two hot and a common neutral) for separation of fan and light operation. Provides four fan speeds, dimming function for light and comes with decora style wall plate (white only).
HANDHELD REMOTE (-003)
For operation of a fan or a fan with light. Uses only one circuit (two wires). Provides three speeds, dimming or "on/off" light function and timer options for delayed shut down. Includes handset, battery, wall mountable holder and an RF canopy receiver.
FAN & LIGHT - 2 WIRE (-004)
For operation of a fan with light. Uses only one circuit (two wires). Provides three speeds and dimming or "on/off" light function. Includes wall control, decora style wall plate (white only) and an RF canopy receiver.
WALL & REMOTE COMBO (-005)
A combination control package for operation of a fan or a fan with light. Uses only one circuit (two wires). Provides three speeds and dimming or "on/off" light function. Includes remote handset, wall mountable holder, battery, wall control, decora style wall plate (white only) and an RF canopy receiver.
MULTI-FAN SPEED CONTROL (FC-009A/FC-009B)
A three speed fan control designed to control 2-3 fans (#009A) or 3-6 fans (#009B) on a single circuit. Separate control/switching of lights must be planned if this control is to be used for fans with lights. For AC motors only; includes decora style wall plate (white only).
