Schiedel Firechests Stoves
FIRECHESTS STOVES
FIRECHESTS STOVES
The Magnum Fire chest range has been designed to maximise the burning efficiency of wood in an open fire. The specially shaped fire chamber facilitates the efficient burning of wood logs to give efficiencies from 41% to 45 % depending on the model chosen. The fire chest is tested to EN I3229.
INFORMATION
USE
The Isokern fire chest range is cast using lightweight, highly insulating pumice, which is sourced from the Hekla Volcano in Iceland. The components interlock like pieces of a three dimensional jigsaw to form a sturdy, robust fireplace recess and gather. The joints are sealed using lip glue jointing compound. Starting from a suitable foundation and constructional hearth, assembly of the complete fire chest and gather could take less than one hour.
BRAND
Schiedel
PRODUCT TYPE
Stoves
ASSEMBLY INSTRUCTIONS
Each fire chest is packed on a pallet with detailed assembly instructions .
COLLECTION
Firechests
PRODUCTION
Made In United Kingdom
WIDE
The range includes fire chests with fire openings from 500 to 1250mm wide
THE STRUCTURE OF THE SYSTEM
A flue damper is available in the Magnum range of fire chests. In wood burning installations the flue damper can be closed to reduce excessive heat loss when fireplace is not being used. This is reflected in the SAP calculation for Document L .The inclusion of the damper will halve the chimney ventilation rate in the SAP calculations. It must not be installed with gas fires.
Each fire chest has been tested to establish the optimum flue size required to give best possible performance .The recommended flue size is shown in the range table. The minimum flue height required is 4.5m above the fireplace opening.
LOAD
The fire chest is load bearing and will carry up to 2600kg of chimney above, although you may exceed this weight with the use of additional lintels.
DOWNLOADS
↓ Isokern Uk Brochure
↓ Hale Outdoor Kitchen Installation Instructions
↓ Magnum Firechest Installation Instructions
TESTED
The fire chest is tested to EN I3229.
USE
Indoor
ASSEMBLY
INSTALLATION INSTRUCTIONS