
Rika Imposa Stove
IMPOSA STOVE
IMPOSA STOVE
Thermal mass has never looked better.
An impressive woodburning stove with a generously sized interior. Ideal for large logs, yet compact in its outer dimensions. Available with soapstone casing.
FEATURES
INFORMATION
BRAND
Rika
PRODUCT TYPE
Stove
COLLECTION
Imposa
PRODUCTION
Made in Austria
ROOM HEATING CAPACITY (DEPENDING ON HOUSE INSULATION)
120 - 260 [m³]
THERMAL MASS (155 KG)
The storage mass of the stove is a crucial factor in determining how long it will retain and transfer its heat to the room after the fire has gone out. Basically, the higher the storage mass, the longer the stove will emit heat after the fire has gone cut.
NOMINAL HEAT OUTPUT
10 kw
PARTIAL HEAT OUTPUT
5 kw
RIKATRONIC 3 (YES & NO)
The rikatronic3 electronic stove control regulates combustion and combustion air fully automatically and signals the optimum time for adding fuel. The electronics are sensor-controlled for greater efficiency, lower emissions and optimum fuel utilisation with up to 50% less wood consumption compared to manual control. With rikatronic3, you can heat comfortably and efficiently according to the motto: insert the wood, light it and enjoy the cosy warmth.
FIRING CHAMBER DIMESNIONS
- Width : 400 mm
- Height : 350 mm
- Depth : 320 mm
FRESH AIR CONNECTION
- Diameter : 125 mm
- Side Distance : 289 mm
- Connection Height : 190 mm
EFFICIENCY
86%
FUEL CONSUMPTION
1.4 - 2.8 [kg/h]
USE
Heating
CORPUS DEPTH
516 mm
WEIGHT
- Thermal mass : ~155 kg
- Weight with stones : ~290 kg
- Weight without stones : ~160 kg
FLUE PIPE CONNECTION (BACK & TOP)
A safe stove connection. The original RIKA flue pipes are reliable, resistant, durable and precisely matched to the requirements of the RIKA stove models. The company places the same high quality demands on the pipes as it does on its stoves.
DOWNLOADS
↓ EU-Declaration of Conformity RIKATRONIC
↓ CE-Declaration of Conformity IMPOSA R3
↓ Declaration of performance IMPOSA
↓ Declaration of performance IMPOSA R3
↓ Technical documentation IMPOSA - Ecodesign
↓ Technical documentation IMPOSA R3 - Ecodesign
↓ Declaration of performance IMPOSA 6 kW-IMPOSA R3 6 kW
↓ CE-Declaration of Conformity IMPOSA 6 kW-IMPOSA R3 6 kW
↓ Technical documentation IMPOSA 6 kW-IMPOSA R3 6 kW - Ecodesign
DETAIL
The rikatronic3 electronic stove controller automatically regulates the burn rate and combustion air, and indicates the best time to add more wood logs.
- Save using eco mode
- Convenient heating
- Efficient controland regulation
FLUE PIPE CONNECTION
- Flue pipe outlet : 150 mm
- Rear connection height : 986 mm
- Original angle pipe total depth : 733 mm
- Original angle pipe side distance : 289 mm
- Rear connection side distance : 289 mm
- Original angle pipe connection height : 1711 mm
- Original angle pipe distance to rear wall : 217 mm
- Deapth from rear wall to middle of flue pipe : 156 mm
- Connection height with rotary disk : 2035 mm
ENERGY EFFICIENCY CLASS
A+
CHIMNEY DRAFT REQUIREMENT
12 [Pa]
BURNERS
The imposa woodburning stove is a real space saving sensation and again proves that true greatness has nothing to do with external dimensions. This woodburning stove from rika demonstrates true greatness, combining as it does an impressive interior space with extremely compact outer dimensions for optimum heating output. This stove with thermal storage is thus also suitable for large logs. With its exceptional thermal mass of 155 kg, the imposa woodburning stove ensures long-lasting release of pleasant, natural radiant heat.
RATED HEATING OUTPUT (10 KW)
This is the "normal heating capacity" determined according to DIN 18891. The stove is checked and the room heating capacity is determined according to this rating. The nominal heating capacity is particularly crucial for a safe heating procedure ant the functionality of the chimney. The combustion of a defind quantity of fuel is necessary to achieve the nominal heating capacity. This quantity of fuel is specified in the instruction manuals provided with RIKA stoves. The actual heating capacity of a stove is determined by the amount of fuel actually applied. The following applies as a "rule of thumb". 1 kg of wood generates a heating capacitt of around 3 kw in a stove.
