Sabiana Atlas Unit Heater
ATLAS UNIT HEATERS
ATLAS UNIT HEATERS
The Atlas unit heaters have a big heart: a coil that has been conceived, designed and manufactured specifically for heating industrial environments.
The thickness of the pipes, steel as standard, the diameter (Ø 22 mm) and the excellent ratio between the flow-rate of air and the heat output guarantee long life and exceptional comfort. The Atlas unit heaters are made in 10 sizes, with heat outputs from 5 to 120 kW, and are available with 1 row coils for steam or high-temperature water systems, 2 row coils for hot water systems and 3 row coils for low-temperature hot water systems.
INFORMATION
BRAND
Sabiana
PRODUCTION
Made In Italy
PRODUCT TYPE
Heaters
USE
Heating industrial environments
MATERIAL
- Pipes
- Steel
AVAILABLE
1 Row coils
SIZES
10
DIAMETER
Ø 22 mm
UNIT HEATERS ARE MADE
4 sizes, each with 3 and 4 row coils
COLLECTION
The condensate collection tray is fitted inside the unit
HEATING AND COOLING
- Copper tubes.
- Aluminium fins.
TECHNICAL DRAWINGS
CASING
-The casing is manufactured from galvanized prepainted steel finished in a light grey colour (RAL 9002). -The adjustable louvres are held firm by spring loaded pivots. -Fourway distribution is achieved by the addition of a second of the unit generally for downward application.
STEAM “V” MODEL
- Steel tubes
- Aluminium fins.
FAN/MOTOR ASSEMBLY
- Fan
- Motor
MOTOR
-The standard motor is a hermetically sealed motor which is maintenance free. Two speed - three phase - 4/6 poles or 6/8 poles motor - The motor is supplied as standard for a three phase 400 volt 50 Hz supply, two speeds, IP55 protection, with Klixon thermal protection. One speed - three phase -4 poles or 6 poles motor -The motor is supplied as standard for a three phase 400 volt 50 Hz supply, one speed, IP44 protection. -The number of poles in the motor determines the speed at which the motor runs -4 pole motor runs at 1350÷1400 rpm -6 pole motor runs at 900÷1000 rpm -8 pole motor runs at 700÷750 rpm
