TANGENT SPECTRUM XC II SPEAKER
TANGENT SPECTRUM XC II SPEAKER
2 way bass-reflex centre loudspeaker
Centre speaker in satin black or white. Delivers crystal-clear voices and pairs perfectly with other Spectrum II models.
Designed to complement your home cinema system, the Spectrum II XC centre loudspeaker delivers crystal-clear voice and sound reproduction. Its 2 way bass-reflex architecture incorporates a 1" dome tweeter and two 4" cellulose mid-woofer drivers.
Its sleek design, true to the spirit of the Spectrum II range, makes it the ideal complement to the Spectrum II X5, Spectrum II X6 and Spectrum II XATM loudspeakers, for a coherent, immersive home cinema experience.
INFORMATION
BRAND
Tangent
COLLECTION
Tangent
PRODUCT TYPE
Stereo Preamplifier
SPEAKER USAGE
Center
2-WAY BASS REFLEX SPEAKER
Built as a 2-way bass reflex speaker with a 1” dome tweeter and two 4” cellulose-pulp mid-woofers, it provides a well-balanced soundstage where voices and details always stand out clearly – at any volume level.
NET WEIGHT
4.6 kg
TWEETER
1” dome
SPEAKER TYPE
Passive
FREQUENCY RANGE
55 Hz – 20 kHz (±3 dB)
SENSITIVITY
88 dB (1W/1m)
MID-WOOFER
2 x 4” Cellulose pulp
SPECTRUM II XC IS A DEDICATED CENTRE SPEAKER
Spectrum II XC is a dedicated centre speaker available in satin black or white. It is designed to deliver crystal-clear voice reproduction and precise dialogue, ensuring you get the most out of your movie and TV experiences
PRODUCT CODES
- Black : 5703959232144
- White : 5703959232137
RECOMMENDED AMPLIFIER
20 – 120 W
POWER
80 W RMS / 120 W Peak
DIMENSIONS
- Width : 395 mm
- Height : 145 mm
- Depth : 198 mm
CROSSOVER
2300 Hz – 12 dB/oct.
NOMINAL IMPEDANCE
6 Ω
DETAIL
A pair of compact bookshelf speakers in satin black or white. Delivers big sound in a small format and can be wall-mounted with an optional bracket.
MINIMALIST DESIGN
With its sleek, minimalist design, the XC matches perfectly with the rest of the Spectrum II range. It is the ideal companion to the X5, X6, and XATM when creating a coherent, immersive surround setup
TWS STEREO
- Bass reflex
- 2-way bookshelf speaker
AVAILABLE COLORS
2
CENTER
Central loudspeaker
DOWNLOADS
↓ Tech Sheet
↓ Manual
USE
CHOICE OF AMPLIFIER
Your setup type (stereo or home-cinema) will determine the choice of the appropriate amplifier. Your dealer will be able to advise you on the most suitable amplifier for your system.
PREPARATION
- Sticking the rubber pads : If your floor is of the hard type : parquet, tiles, etc., we recommend you use the pads to protect the loudspeaker’s base while limiting vibrations.
- Positioning the xlcr loudspeaker with a permanent screen or TV screen : Place the loudspeakers as close as possible to the screen. The mounting brackets allow you to install the loudspeaker horizontally or vertically.
CLEANING INSTRUCTIONS
To improve the lifetime of your loudspeakers, we recommend regular cleaning. A soft cloth will be enough for dusting. If the loudspeaker is stained, we recommend simply using a damp cloth with some mild soap if necessary. The front panel can be cleaned with a soft cloth and standard glass cleaning product. Never use solvents, detergents, alcohol-based or corrosive products, scrapers or scourers to avoid any damage on the loudspeaker surface. Keep the loudspeakers away from sources of heat
BURN-IN PERIOD
When you take them out of the packaging, the Spectrums II loudspeakers are not yet able to reproduce with the same efficiency all the sound frequencies they are supposed to play. The Spectrum II range loudspeakers are complex mechanical assemblies which need a period of adaptation (“burn-in”) to operate at their best and become acclimatised to the temperature and humidity conditions of your environment.
This burn-in period may last for some weeks, but you can quicken it by operating the loudspeakers between 50 and 100 hours consecutively, on a moderate volume and broadcasting a radio station. We advise increasing this period to 150 hours for the X6 loorstanding loudspeakers, and the XSW8









